Glass Cleaner
Where every job starts. Strips the film so the glass underneath is honest about how bad it actually is.
Shower glass care kit
Water either stays,
or it leaves.
Five steps that strip hard water off your shower glass and seal the surface, so the marks stop coming back. Not a spray. A process.
The problem
It is not dirt.
That is why it
will not come off.
Hard water leaves minerals behind when it dries. They settle into the pores of the glass and bond there. At that point you are not cleaning a surface, you are trying to remove something that has become part of it.
The screen never looks clean from the water marks, even with a steam cleaner and the best rated limescale remover. A professional cleaner, on their own shower
The idea
Bead.
Bare glass is porous, so water spreads out, sits in the surface, and dries into deposits. Sealed glass gives it nothing to hold. Water pulls into beads, runs off, and takes the minerals with it.
Drag across the glass
The process
Four steps of force.
One that makes them
unnecessary.
Each step is stronger than the one before it. You work up until the glass is bare, then you seal it so you never have to go back down the ladder.
01
Glass Cleaner
Process First
Takes off the loose film, soap residue and body oils, so the stronger steps reach actual glass instead of wasting themselves on grime.
Hardness
02
Paint Remover
Process Second
Clears paint flecks, sealant haze and builder residue. Most shower screens still carry marks from the day they were installed.
Hardness
03
Chemical Scrubbing
Process Third
Breaks the bond holding the mineral deposits in the surface and lifts them out. This is the step that finally clears the cloudiness.
Hardness
04
Nano Glass Coating
Process Final
Fills the pores and seals the surface at 9H. Water stops spreading and starts beading. This is the step that lasts.
Hardness
9H
In the box
Everything the job
actually takes.
Five bottles, two cloths and two pads, held in satin inside a rigid box. Enough to do a full screen and keep the coating topped up. Everything about the kit.
2×Glass Cleaner
50 ml
50 ml
1×Chemical Scrubbing
50 ml
50 ml
1×Paint Remover
50 ml
50 ml
1×Nano Coating
50 ml
50 ml
2×Microfiber cloths
2×Application pads
First and last
The two steps that
do the most work.
Nano Glass Coating
The 9H seal. One careful application and the surface stops holding water for up to two years.
After
Glass you stop
thinking about.
The daily fight ends. Water runs off instead of drying on, so the screen keeps looking like it did the week it was fitted.
A squeegee pass takes seconds instead of scrubbing
Soap scum has far less to grip onto
No harsh weekly chemicals in the bathroom
Works on mirrors, partitions and shower niches too
Straight answers
The questions
people ask first.
If something here is still unclear, ask on WhatsApp and you will get a real answer rather than a sales pitch. Longer answers are in the full FAQ and our glass care guides.
Does this actually work, or is it another spray?
It works, and it helps to know why. The first three bottles remove what is on the glass. The fourth seals the surface so water beads instead of spreading. That last step is the part a normal cleaning spray does not do at all, and it is why the result holds instead of coming back in a fortnight.
My glass is already badly marked. Is it too late?
That is the case this kit was built for. Steps two and three exist specifically to pull bonded deposits back out of the surface. Very old damage that has etched deep can leave a faint shadow, but in almost every case the glass comes back clear.
Do I still have to squeegee?
Yes, and anyone telling you otherwise is overselling. The difference is that it becomes a quick pass rather than a scrub, because the water is already running off on its own instead of drying in place.
How long before I need to do it again?
Up to two years on the coating, depending on how hard your water is and how often the shower runs. The kit has a spare Glass Cleaner so you can keep the surface maintained between full applications.
Is it difficult to apply?
No. Each bottle is used in order, with the pads and cloths included. Work one panel at a time, let the coating cure, and keep the glass dry for a few hours afterwards.
Can I use it on anything besides shower glass?
Yes. Mirrors, glass partitions, balcony railings and windows all take the same treatment. Avoid it on anything with an existing factory coating already applied.
Get the kit
Do it once.
Forget it for two years.
Message us and tell us how big the screen is and how bad it looks right now. We will tell you honestly whether one kit covers it.
Made in India · 100% protection for 2 years