Price and delivery: ask on WhatsApp. Tell us how big your glass is and we will tell you the price, the delivery time, and honestly whether one kit covers it.
What it does
Hard water leaves minerals behind every time it dries on glass, and ordinary cleaners only lift what sits on top, so the marks come back. The kit works in a fixed order: clean, strip, scrub, then seal. The first bottles remove what has built up on the glass. The final step seals the surface with a 9H nano coating, so water beads and runs off instead of drying into new marks.
The coating lasts up to two years, depending on how hard your water is and how often the shower runs.
The four steps
Each step is stronger than the one before it. You work up until the glass is bare, then you seal it.
- Glass Cleaner. Takes off the loose film, soap residue and body oils, so the stronger steps reach actual glass instead of wasting themselves on grime.
- Paint Remover. Clears paint flecks, sealant haze and builder residue. Most shower screens still carry marks from the day they were installed.
- Chemical Scrubbing. Breaks the bond holding the mineral deposits in the surface and lifts them out. This is the step that finally clears the cloudiness.
- Nano Glass Coating. Fills the pores and seals the surface at 9H. Water stops spreading and starts beading. This is the step that lasts.
The second Glass Cleaner in the box is the spare, for keeping the surface maintained between full applications.
What is in the box
| Item | Quantity |
|---|---|
| Glass Cleaner, 50 ml | 2 bottles (the second is for upkeep between full applications) |
| Chemical Scrubbing, 50 ml | 1 bottle |
| Paint Remover, 50 ml | 1 bottle |
| Nano Glass Coating, 50 ml | 1 bottle |
| Microfibre cloths | 2 |
| Foam applicator pads | 2 |
Where you can use it
- Shower screens, the job it was built for.
- Mirrors, glass partitions, balcony railings and windows all take the same treatment.
- Not on glass that already has a factory-applied coating.
How it goes
Each bottle is used in order, with the pads and cloths included. Work one panel at a time, let the coating cure, and keep the glass dry for a few hours afterwards. Use it in a well ventilated room, with gloves on, and never mix it with other cleaners: see using the kit safely.
Afterwards, a quick squeegee after showers keeps it that way: the 30-second routine.
What it will not do
- It will not end squeegeeing. It turns a scrub into a quick pass, because the water runs off on its own.
- It will not undo deep etching. Very old damage that has etched into the glass can leave a faint shadow, though in almost every case the glass comes back clear. Not sure? How to tell.
Common questions
Does this actually work, or is it another spray?
It works, and it helps to know why. The first bottles remove what is on the glass. The last one seals the surface so water beads instead of spreading. That last step is the part a normal cleaning spray does not do at all, and it is why the result holds instead of coming back in a fortnight.
My glass is already badly marked. Is it too late?
That is the case this kit was built for. Steps two and three exist specifically to pull bonded deposits back out of the surface. Very old damage that has etched deep can leave a faint shadow, but in almost every case the glass comes back clear.
Is it difficult to apply?
No. Each bottle is used in order, with the pads and cloths included. Work one panel at a time, let the coating cure, and keep the glass dry for a few hours afterwards.
More answers: the full FAQ. Made in India, by Infinite Coatz in Delhi, since 2021.